 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Technical Data FEATURES Low noise: 1 nV/Hz at 1 kHz Low distortion: -105 dB THD @ 20 kHz <80 nV p-p input noise, 0.1 Hz to 10 Hz Slew rate: 16 V/s Wide bandwidth: 10 MHz Supply current: 4.7 mA typical Low offset voltage: 10 V typical CMRR: 120 dB Unity-gain stable 15 V operation Single, Ultralow Distortion, Ultralow Noise Op Amp AD8597 PIN CONFIGURATION Figure 1. 8-Lead SOIC (R-8) NC 1 -IN 2 +IN 3 V- 4 TO P VIEW (Not to Scale) 8 NC 7 V+ 6 OUT 5 NC APPLICATIONS Professional audio preamplifiers ATE/precision testers Imaging systems Medical/physiological measurements Precision detectors/instruments Precision data conversion NC = NO CONNECT Figure 2. 8-LFCSP (3x3)(CP-8) GENERAL DESCRIPTION The AD8597 is a single, very low noise, low distortion operational amplifier ideal for use as a preamplifier. The low noise of 1 nV/Hz and low harmonic distortion of -105 dB (or better) at audio bandwidths give the AD8597 the wide dynamic range necessary for preamps in audio, medical, and instrumentation applications. The AD8597's excellent slew rate of 16 V/s and 10 MHz gain bandwidth make it highly suitable for medical applications. The low distortion and settling time of the AD8597 make it ideal for buffering of high resolution data converters. The AD8597 is available in an 8-Lead SOIC and 8-Lead LFCSP (3x3) packages and is specified over a -40C to +125C temperature range. Rev. PrA Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2008 Analog Devices, Inc. All rights reserved. AD8597 SPECIFICATIONS VS = 15 V, VCM = 0 V, VO = 0 V, TA = +25C, unless otherwise specified. Table 1. Parameter INPUT CHARACTERISTICS Offset Voltage Symbol VOS -40C TA +125C Offset Voltage Drift Input Bias Current Input Offset Current Input Voltage Range Common-Mode Rejection Ratio Large Signal Voltage Gain Input Capacitance OUTPUT CHARACTERISTICS Output Voltage High VOS/T IB -40C TA +125C IOS IVR CMRR AVO CDIFF CCM VOH RL = 600 -40C TA +125C RL = 2 k -40C TA +125C RL = 600 -40C TA +125C RL = 2 k -40C TA +125C At 1 MHz, AV = 1 VDD = 18 V to 4.5 V -40C TA +125C -40C TA +125C DYNAMIC PERFORMANCE Slew Rate Settling Time Gain Bandwidth Product Phase Margin NOISE PERFORMANCE Peak-to-Peak Noise Voltage Noise Density Current Noise Total Harmonic Distortion + Noise SR ts GBP M en p-p en AV = -1, RL = 2 k AV = 1, RL = 2 k To 0.01%, step = 10 V -40C TA +125C VDD = 15 V -12.5 V VCM +12.5 V -40C TA +125C RL 600 , VO = -11 V to +11 V -40C TA +125C -40C TA +125C Conditions Preliminary Technical Data Min Typ 10 Max 120 180 2.2 180 300 180 220 +12.5 Unit V V V/C nA nA nA nA V dB dB dB dB pf pf V V V V V V V V mA dB dB mA mA V/s V/s s MHz Degrees nV nV/Hz nV/Hz pA/Hz dB dB 0.8 25 25 -12.5 120 115 110 106 140 116 4.8 4.5 13.1 12.8 13.5 13.2 13.4 13.7 -13.2 -13.5 52 5 -12.9 -12.8 -13.4 -13.3 Output Voltage Low VOL Output Short Circuit Current Closed-Loop Output Impedance POWER SUPPLY Power Supply Rejection Ratio Supply Current per Amplifier ISC ZOUT PSRR ISY 120 118 140 4.7 5.7 6.75 16.8 15 2 10 68 76 1.07 1.5 -108 -105 THD + N 0.1 Hz to 10 Hz f = 1 kHz f = 10 Hz f = 1 kHz G = 1, RL 1 k, f = 1 kHz, VRMS = 3 V G = 1, RL 1 k, f = 20 kHz, VRMS = 3 V 1.15 1.5 Rev. A | Page 2 of 3 Preliminary Technical Data ABSOLUTE MAXIMUM RATINGS Table 2. Parameter Supply Voltage Input Voltage Differential Input Voltage Output Short-Circuit to GND Storage Temperature Range Operating Temperature Range Lead Temperature Range (Soldering 60 sec) Junction Temperature Rating 18 V GND to VDD 1 V Indefinite -65C to +150C -40C to +125C 300C 150C AD8597 THERMAL RESISTANCE JA is specified for the worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages. Table 3. Thermal Resistance Package Type 8-Lead LFCSP (CP-8) 8-Lead SOIC (R-8) JA TBD 120 JC TBD 36 Unit C/W C/W POWER SEQUENCING The op amp supplies must be established simultaneously with, or before, any input signals are applied. If this is not possible, the input current must be limited to 10 mA. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION Rev. PrA | Page 3 of 3 PR07669-0-7/08(PrA) |
Price & Availability of AD8597
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |